Two Raquex padel racquets co-branded with the Padel Centre logo, one dark green and one cream, laid on a blue court beside a ball
Co-branded racquets

Your club's name on the racquet

Your logo alongside ours on the face of a Raquex racquet. The same shape and build we sell under our own name, finished in your club's identity.

Start a design

Co-branded padel racquets for clubs, academies, leagues and venues. We print your logo on a Raquex frame that already exists, so there is no tooling to pay for and no new mould to sign off. Runs start at 25 racquets per design and go up in twenty-fives.

Clubs use them for hire fleets, for academy squads, for league prizes and for the pro shop shelf. Because the frame is one we already make, the racquet your members pick up plays exactly like the one they can buy from us.

The racquet

Built on the Eclipse

Co-branded runs are built on the Eclipse, our control-first frame and the one nearly every club run so far has used. Round head, large sweet spot, full carbon. Forgiving enough for a hire fleet and good enough that members ask where to buy one.

6 Power
9 Control
8 Comfort
Weight
360g, plus or minus 10g
Profile
38mm
Balance
Mid to low, 265mm
Head
Round, large sweet spot
Frame
Full carbon, Twin-Air construction, tubeless
Core
ImpactCore Medium EVA
Surface
SpinTec, for spin and control
Handle
Longer comfort grip, wrist strap included
Two Raquex padel racquets co-branded with the Padel Centre logo, one dark green and one cream, laid on a blue court beside a ball
What carries your branding

Three places on the frame are yours

  • The face. The large central logo, and the part people photograph. Leagues often give this to a sponsor rather than to themselves.
  • The throat. A second mark, for a league, a season or a squad.
  • The top edge. A wordmark running along the outer edge of the frame.

The grip and the ring at the top of the finishing tape carry the Raquex logo, as they do on every racquet we build. Base colour is yours to choose, and a colour-inverted version is usually worth seeing before you decide.

Already on court

Some examples of our previous racquets

Raquex padel racquet co-branded with the Marvel Padel logo
Marvel Padel

Logo on the face, club colours on the frame.

Raquex padel racquet co-branded with the Stafford Padel Club logo
Stafford Padel Club

A single colour mark, held back against a dark base.

Raquex padel racquet co-branded with the Omnipadel logo
OmniPadel

Wordmark across the face, logo on the throat.

Raquex padel racquet co-branded with a partner club logo in gold
Gold on black

What a metallic finish looks like on a dark frame.

How it works

From your logo to your racquets

  1. Send your artworkBrand guidelines and your logo as a vector file. If you have a colour palette, send that too.
  2. We draft designsA couple of options, laid out on the real frame so you can see how they sit.
  3. You pick oneChange the colours, move a mark, see it inverted. Nothing goes to the factory until you are happy.
  4. Into productionPrint files go to the factory with the next run. Quantities are confirmed and invoiced at this point.
  5. Delivered to the clubShipped to you in one consignment, ready for the rack.
Start a design

Tell us about your club

Send us the shape of what you need and we will come back with designs and a price. If you already have your logo as a vector file, say so and we will ask for it.

Trade and club pricing is set per run, so quantity is the thing worth telling us first.

Choose your country, then enter your number.

Not ready for your own design?

We supply clubs with the standard range too, at trade rates and without a minimum per design.

Padel equipment for clubs